> For the complete documentation index, see [llms.txt](https://docs.tjuav.org/tjuav/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://docs.tjuav.org/tjuav/software-1/mechanical/cura/supports.md).

# Supports

![](https://370187167-files.gitbook.io/~/files/v0/b/gitbook-legacy-files/o/assets%2F-Lqahbu4tnjGDOT6t3lN%2F-MUKc9UlYKZyQdjrFiLT%2F-MUKcTS1bOogCkiCwQhu%2Fimage.png?alt=media\&token=21a7db55-b3eb-4d80-bcf9-eb95c6c346de)

You just have to click "Generate Support" and then play around with the first 3 settings.

**Support Overhang Angle:** if the angle between layers is greater than this it will generate supports. This is measured from the normal (vertical).

**Support Pattern:** Zig Zag is very good for easily removable supports. Under the Experimental Tab, Tree Support is very good for easy to remove, lightweight, quick supports.